Home > HP Printer Parts > Fuser > HP P4014 P4015 P4515 Fuser

HP P4014 P4015 P4515 Fuser CB506-67901, RM1-4554

What does a P4014 P4015 P4515 Fuser CB506-67901, RM1-4554 do?

The fuser is one of the primary imaging components inside of laser printers. The fuser is a Teflon coated roller or film that heats up to specified temperature. Using specific pressure from a roller and heat it bonds the toner from the drum and toner cartridge onto your sheet of paper.

The Standard HP P4014 P4015 P4515 Fuser Contains:

1 Fusing Assembly: RM2-1928, CB506-67901

Specifications

Price:

UPC Code: 845282077865

Weight 3 lbs

Power 110 volt

Availability: In Stock

Supports Factory Warranty: Yes

HP P4014 P4015 P4515 Fuser Manufacture Part Numbers

CB506-67901
RM1-4554
RM1-4554-000CN

Solves The Following Error Codes, Messages

50.xx
50.1
50.2
50 Service
"Replace Maintenance Kit"

For Use in the Following Printer Models

HP LaserJet P4014dn
HP LaserJet P4014n
HP LaserJet P4015dn
HP LaserJet P4015n
HP LaserJet P4015tn
HP LaserJet P4015x
HP LaserJet P4515n
HP LaserJet P4515tn
HP LaserJet P4515x
HP LaserJet P4515xm

When Should a P4014 P4015 P4515 Fuser CB506-67901, RM1-4554 Be Replaced?

On the HP M652 M653 M681 M682 Laser Printers the OEM recommends replacing the maintenance kit every 150,000 pages or as needed.

What Are The Different Types Of HP P4014 P4015 P4515 Fuser CB506-67901, RM1-4554?

Original Equipment Manufacturer (Highest Price - Highest Quality) comes from the original equipment manufacturer. It may or may now be new.
Equivalent To New - (Competitive Price - Excellent Quality) Comes from a reputable manufacture that uses the OEM core and replaces worn components. Like new!
Aftermarket- (Moderate Price - Moderate Quality) Comes from Asian sources, It may or may now be new.

Installation and Replacement Instructions

------------- WARNING: Printer Parts May Be Hot -------------
Turn the printer off, unplug it, and allow it to sit for 30 minutes before

performing these maintenance procedures. Removing or replacing parts when the printer is turned on will harm the device irrevocably.

Other Helpful Resources

Paper Jam Solutions For Laserjet Printers
Printer Service And Parts Glossary
Simple Steps To Isolating Printer Image Defects And Free Printable Tools
Printer Service Error Codes
Top Five HP Printer Troubleshooting Skills

HP P4014 P4015 P4515 Fuser CB506-67901, RM1-4554 Fusing Assembly Removal and Replacement

1. Open the rear output bin/face up tray and remove it from the printer.
a.) Locate the left side hinge pin (there is a finger notch) push the left hinge pin to the right to
release it from its mounting hole.

2. Pinch the blue tabs on the fuser and pull it out of printer.
3. Push the new fuser into the printer making sure both blue tabs lock the fuser in place.
4. Reinstall the rear output bin/face up tray and check for proper operation.

HP P4014 P4015 P4515 Fuser CB506-67901, RM1-4554 Resetting the Maintenance Count

1. Turn the printer on and allow it reach the READY state.
2. Press the HOME button.
3. Use the arrow keys to highlight ADMINISTRATION then hit OK.
4. Use the arrow keys to highlight MANAGE SUPPLIES then hit OK.
5. Use the arrow keys to highlight RESET SUPPLIES then hit OK.
6. Use the arrow keys to highlight NEW MAINTENANCE KIT then hit OK.
7. Use the arrow keys to highlight YES then hit OK.

Frequently Ask Questions FAQ

What is Advance Exchange?

Advance Exchange is when you order the part or kit with the promise of returning the non-functional part from the machine as your replacement core. The benefit you is get a great discount and you help the environment.

I Dont Want To Install This Fuser. Can I Hire Someone Do it for me?

National Printer Service Dealer Network

More Troubleshooting Help

Solving Noise Issues After Replacing The New Fuser

Be certain that both sides of the fuser are firmly locked into the printer. Listen for the two locks to snap in when you install it. If the fuser is not secured, the printer may display a “50.3 FUSER ERROR” message or you may hear a grinding noise. In either of these cases, remove the fuser and reinstall it making sure that both sides are locked in place.

Helpful Resources