Home > HP Printer Parts > HP M604 M605 M606 Maintenance Kit

HP M604 M605 M606 Maintenance Kit

What is a Maintenance Kit?

Worn roller padding, paper dust and abrasive toner can reduce print quality and cause paper jams as well as premature wearing on gears. The Preventive Maintenance Kit contains the parts recommended by the OEM that should be changed periodically to prevent downtime of the printer.

How much are F2G76-67901 M604 M605 M606 Maintenance Kits

The Standard M604 M605 M606 Maintenance Kit Contains:

1Transfer Roller: RM1-0699
4 Feed/Separation Roller: RM1-0037
2 Pickup Roller: RM1-0036
1 Fusing Assembly: E6B67-67901, RM2-6308

Specifications

Price:

UPC Code: 888182486993

Weight 4 lbs

Power 110 volt

Availability: In Stock

Supports Factory Warranty: Yes

Maintenance Kit Manufacture Part Numbers

F2G76-67901
F2G76A
HP F2G76A

For Use in the Following Printer Models

HP LaserJet Enterprise M604dn
HP LaserJet Enterprise M604n
HP LaserJet Enterprise M605dh
HP LaserJet Enterprise M605dn
HP LaserJet Enterprise M605n
HP LaserJet Enterprise M605x
HP LaserJet Enterprise M606dn
HP LaserJet Enterprise M606x

When Should a Maintenance Kit Be Replaced?

On the HP M607 M608 M609 Laser Printers the OEM recommends replacing the maintenance kit every 225,000 pages or as needed.

What Are The Different Types Of Maintenance Kits?

Original Equipment Manufacturer (Highest Price - Highest Quality) comes from the original equipment manufacturer. It may or may now be new.
Equivalent To New - (Competitive Price - Excellent Quality) Comes from a reputable manufacture that uses the OEM core and replaces worn components. Like new!
Aftermarket- (Moderate Price - Moderate Quality) Comes from Asian sources, It may or may now be new.

More Options

With OEM rollers- The rollers in the maintenance kit are OEM original equipment manufacturer. (Highest Price - Highest Quality)
With Aftermarket Rollers- The rollers in the maintenance kit are from an Asian importer. (Competitive Price - Excellent Quality)

Installation and Replacement Instructions

------------- WARNING: Printer Parts May Be Hot -------------
Turn the printer off, unplug it, and allow it to sit for 30 minutes before

performing these maintenance procedures. Removing or replacing parts when the printer is turned on will harm the device irrevocably.

M604 M605 M606 Maintenance Kit Transfer Roller Removal and Replacement

Open toner access door and remove the toner cartridge.
Use the included puller tool to lift the left side (blue gear side) of the transfer roller.
Slide the transfer roller to the left and remove it from the printer.
Slide the right side of replacement transfer roller into the right side bushing.
Align left side collar making sure the open end is face down and push down to lock it in place.

CAUTION: Do not touch the surface of the transfer roller. Contact with skin can cause print quality problems.

Other Helpful Resources

M604 M605 M606 Maintenance Kit Tray 2 Pickup and Feed/Separation Roller Removal and Replacement

1. Remove the paper tray from the printer.
2. On the tray, lift the roller cover next to the pickup roller.
3. Pinch the pickup roller’s blue tab and slide it to the left and off the shaft.
4. Slide new pickup roller onto the shaft, making sure its blue tab locks it into place.
5. Locate the pickup and feed/separation rollers in the top of the tray cavity.
6. Repeat steps 3 and 4.
NOTE: The removal and replacement process is the same for the tray 3 - 6 pickup and feed/separation rollers.

M604 M605 M606 Maintenance Kit Fusing Assembly Removal and Replacement

1. Open the rear output bin/face up tray and remove it from the printer.
a.) Locate the left side hinge pin (there is a finger notch) push the left hinge pin to the right to
release it from its mounting hole.

2. Pinch the blue tabs on the fuser and pull it out of printer.
3. Push the new fuser into the printer making sure both blue tabs lock the fuser in place.
4. Reinstall the rear output bin/face up tray and check for proper operation.

M604 M605 M606 Maintenance Kit Resetting the Maintenance Count

1. Turn the printer on and allow it reach the READY state.
2. Press the HOME button.
3. Use the arrow keys to highlight ADMINISTRATION then hit OK.
4. Use the arrow keys to highlight MANAGE SUPPLIES then hit OK.
5. Use the arrow keys to highlight RESET SUPPLIES then hit OK.
6. Use the arrow keys to highlight NEW MAINTENANCE KIT then hit OK.
7. Use the arrow keys to highlight YES then hit OK.

Frequently Ask Questions FAQ

What is Advance Exchange?

Advance Exchange is when you order the part or kit with the promise of returning the non-functional part from the machine as your replacement core. The benefit you is get a great discount and you help the environment.

What does a M604 M605 M606 fuser do?

The fuser is one of the primary imaging components inside of laser printers. The fuser is a Teflon coated roller or film that heats up to specified temperature. Using specific pressure from a roller and heat it bonds the toner from the drum and toner cartridge onto your sheet of paper.

I Dont Want To Install This Maintenance Kit. Can I Hire Someone Do it for me?

National Printer Service Dealer Network

More Troubleshooting Help

Solving Noise Issues After Replacing The New Fuser

Be certain that both sides of the fuser are firmly locked into the printer. Listen for the two locks to snap in when you install it. If the fuser is not secured, the printer may display a “50.3 FUSER ERROR” message or you may hear a grinding noise. In either of these cases, remove the fuser and reinstall it making sure that both sides are locked in place.

Helpful Resources