Home > HP Printer Parts > HP P4014 P4015 P4515 Maintenance Kit
HP P4014 P4015 P4515 Maintenance Kit CB388A
What is a P4014 P4015 P4515 Maintenance Kit CB388A?
Worn roller padding, paper dust and abrasive toner can reduce print quality and cause paper jams as well as premature wearing on gears. The Preventive Maintenance Kit contains the parts recommended by the OEM that should be changed periodically to prevent downtime of the printer.
The Standard P4014 P4015 P4515 Maintenance Kit CB388A Contains:
-
1 Transfer Roller: RM1-0699
-
4 Feed/Separation: Rollers RM1-0037
-
2 Pickup Rollers: RM1-0036
-
1 Fusing Assembly: CB506-67901, RM1-4554
Specifications
Price:
UPC Code: 883585279982
Weight 4 lbs
Power 110 volt
Availability: In Stock
Supports Factory Warranty: Yes
P4014 P4015 P4515 Maintenance Kit Manufacture Part Numbers
-
HP CB388A
-
CB388-67903
-
CB388-67901
For Use in the Following Printer Models
HP LaserJet P4014
HP LaserJet P4014dn
HP LaserJet P4014n
HP LaserJet P4015dn
HP LaserJet P4015n
HP LaserJet P4015tn
HP LaserJet P4015x
HP LaserJet P4515n
HP LaserJet P4515tn
HP LaserJet P4515x
HP LaserJet P4515xm
When Should a Maintenance Kit Be Replaced?
On the HP P4014 P4015 P4515 Laser Printers the OEM recommends replacing the maintenance kit every 225,000 pages or as needed.
What Types of Maintenance Kits Are There?
-
Original Equipment Manufacturer (Highest Price - Highest Quality) comes from the original equipment manufacturer. It may or may now be new.
-
Equivalent To New - (Competitive Price - Excellent Quality) Comes from a reputable manufacture that uses the OEM core and replaces worn components. Like new!
-
Aftermarket- (Moderate Price - Moderate Quality) Comes from Asian sources, It may or may now be new.
More Options
-
With OEM rollers- The rollers in the maintenance kit are OEM original equipment manufacturer. (Highest Price - Highest Quality)
-
With Aftermarket Rollers- The rollers in the maintenance kit are from an Asian importer. (Competitive Price - Excellent Quality)
Installation and Replacement Instructions
------------- WARNING: Printer Parts May Be Hot -------------
Turn the printer off, unplug it, and allow it to sit for 30 minutes before
performing these maintenance procedures. Removing or replacing parts when the printer is turned on will harm the device irrevocably.
Transfer Roller Removal and Replacement
1. Open toner access door and tray 1.
2. Remove toner cartridge.
3. Lift the gear (left side) of the transfer roller up.
4. Slide to the left and remove.
5. Slide right side of replacement roller into right bushing.
6. Align left side collar making sure the open end is face down and push in.
CAUTION: Do not touch the surface of the transfer roller. Contact with skin can cause print quality problems.
Tray 2 Feed and Separation Roller Removal and Replacement
-
Remove the tray from the printer.
-
On the tray 1, lift the roller cover next to the roller.
-
Pinch the blue tab and slide the roller off the shaft.
-
Slide new roller on making sure the tab locks.
-
Locate the feed roller in the top of the tray cavity.
-
Repeat steps 3 and 4.
NOTE: The removal and replacement process are the same for the feed and separation rollers on tray 3 and the 1500 sheet feeder.
Fusing Assembly Removal and Replacement
-
Open rear output bin/face up tray.
-
Remove output bin from printer.
-
Locate the left side hinge pin (there is a finger notch) squeeze the left hinge pin to the right to release it from its mounting hole.
-
Slide the output bin to the left to remove from printer.
-
Pinch the blue tabs on the fuser and pull fuser out of printer.
-
Push the new fuser into the printer making sure both blue tabs lock.
-
Install the rear output bin/face up tray and check for proper operation.
Resetting the P4014 P4015 P4515 Maintenance Kit CB388A Maintenance Count
1. Turn printer on and during the memory counting up press and hold the OK button until the ready, attention and data lights come on solid.
2. Release the OK button and the display will say ‘SELECT LANGUAGE’. Press the up arrow once, now the display will say ‘NEW MAINTENANCE KIT’. Press the OK button to execute.
3. Verify proper reset of maintenance count.
a.) Select ‘PRINT CONFIGURATION’ from the Information menu.
b.) Check that the ‘Pages since last maintenance’ entry on the configuration page is set to zero.
c.) If not, repeat steps 1 through 3
Frequently Ask Questions FAQ
What is Advance Exchange?
Advance Exchange is when you order the part or kit with the promise of returning the non-functional part from the machine as your replacement core. The benefit you is get a great discount and you help the environment.
What is a P4015 fuser? What does it do?
The fuser is one of the primary imaging components inside of laser printers. The fuser is a Teflon coated roller or film that heats up to specified temperature. Using specific pressure from a roller and heat it bonds the toner from the drum and toner cartridge onto your sheet of paper.
I Dont Want To Install This Maintenance Kit. Can I Hire Someone Do it for me?
National Printer Service Dealer Network
More Troubleshooting Help
Special Note On Firmware For This Model
If your printer’s motors and fans run continually without printing any pages, and with “PROCESSING JOB” displayed on the control panel, along with a possible “41.08 ERROR”, the printer’s firmware may need to be upgraded. Firmware versions lower than 04.060.7 will exhibit this problem and can be resolved by visiting http://www8.hp.com/us/en/support-drivers.html and downloading and installing the current firmware revision. See Instructions on opposite side.
Symptoms Of Outdated Firmware
Jamming without cause
# 49.xx errors
Printer stays in "Processing Job" and is slow to print or never actually prints
Poor fusing/ poor images quality
How To Upgrade The Firmware
HP P4014 P4015 P4515 Firmware Upgrade Instructions
Solving Noise Issues After Replacing The New Fuser
Be certain that both sides of the fuser are firmly locked into the printer. Listen for the two locks to snap in when you install it. If the fuser is not secured, the printer may display a “50.3 FUSER ERROR” message or you may hear a grinding noise. In either of these cases, remove the fuser and reinstall it making sure that both sides are locked in place.
Helpful Resources
Buy It Here, Get Support Here!
REVIEWS - Rating: 4.7
★★★★★
By HP User
Excellent comprehensive Instructions!
★★★
By HP User
Could use more photos...
★★★★★
By HP User
The firmware helped solve my problem.
★★★★★
By HP User
I have used this 3 or more times and it works well for me.
