1320 2015 2400 3005 4250 4345 Formatter Board Replacement Instructions
1320 2015 2400 3005 4250 4345
Correct installation of this formatter board is critical to correct operation of the printer !
Follow these steps to properly install your new formatter board:
1. Remove the memory DIMM from the discarded formatter and install it into the same slot on the replacement formatter.
2. Power up - leave the printer on 5 full minutes after"READY"; is displayed. You may be
required to set the time and date before printer displays "READY";.
3. Shut the printer off and leave it off for at least 5 seconds.
4. Power up - leave the printer on for a full 5 minutes after printer displays "READY".
5. Shut the printer off and leave it off for at least 5 seconds.
6. Power up and perform a cold reset.
7. Shut the printer off.
The printer is now ready for use.
NOTES:
Failure to follow these instructions can result in a printer configuration downgrade.
If the printer displays a 49.xxxx (or any other error message) during this process, continue with the process, it should clear up after completing this procedure.
Other Helpful Resources
Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts. The company's, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years.