HP LaserJet Enterprise M600 M601 M602 M603 Formatter Board CE988-67912
The formatter board of the HP LaserJet Enterprise M600 Printer Series is a customer
self replacement part. It is necessary to follow the procedures below in order to
replace and reinstall the formatter and recover the printer information. Please
follow the procedure as below:
Grab the formatter cover. Pull the cover straight back and away from the product.
Remove the thumb screws and remove the formatter cage.
Remove the hard drive support and the hard drive
cable.
Install the hard drive (with the support and cable) and the memory DIMM from
the discarded formatter board on the new formatter board.
Install the new formatter board.
Turn on the product and then wait for ten minutes once the product has reached
the Ready state. NOTE: ten minutes are required to allow for NVRAM settings to be written.
Turn the product off.
Turn the product on and print a configuration page to verify against original settings.
NOTE: Five minutes are required to allow for NVRAM settings to be written. • Turn the product off. Print a configuration page to verify against original settings.
Other Helpful Resources
Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts. The company's, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years.